——
Wire wound filter element is a sealed deep filtration element, which is tightly wrapped by textile fibers (according to specific processes) on a porous frame, forming a honeycomb structure with sparse outer and dense inner. It has excellent filtration characteristics and can effectively remove suspended solids, rust, particles and other impurities in the fluid. The wire wound filter element is a replacement product produced based on advanced international technology. In response to the disadvantages of high resistance and short service life of wire wound cores in the past, advanced winding technology is adopted to extend the service life by about twice, thereby reducing the number of core changes and lowering the cost of use.
technical parameter
nominal rating(μm) | 1 | 3 | 5 | 10 | 20 | 30 | 50 | 80 | 100 | |||
Filter element degree (in English) | 5 10 20 30 40 50 60 70 | |||||||||||
Filter diameter | 63mm (Flat mouth filter cartridge) | 63mm(with connector filter element) | ||||||||||
texture of material | Filter media | polypropylene pp | polypropylene pp | Natural cotton | glass fibre | |||||||
Internal support core | polypropylene pp | stainless steel | stainless steel | stainless steel | ||||||||
Working temperature | <60℃ | <90℃ | <150℃ | <250℃ | ||||||||
Maximum working pressure difference | 0.24MPa(2 .45bar)@25° C | 0.4MPa(4bar)@25° C | ||||||||||
remarks | 1. Size parameters of the line filter: inner diameter: d, outer diameter: D, degree: L.2. Winding parameters: The number of diamond grids in the circumferential direction is Z, the number of diamond grids in the axial direction is Q, and the number of lines in each diamond grid is N. Once Z, Q, and N are determined, the performance of a line filter can be scientifically standardized. 3. Our company can produce wire filters with diameters ranging from 150mm to 2m, of any length, specification, and different joints. | |||||||||||
Application areas
Pre filtration treatment of general drinking water | R. 0 Reverse osmosis pre filtration treatment |
Filtration of acidic and alkaline liquids in chemical processes | Filtration of various slurries such as syrup and chocolate |
Filtration of chemical raw materials and organic solvents | Filtration of high viscosity resins and oils |
Filtration of paints, oils, and coatings | Filtering of liquid medicine and ink for imaging purposes |
Electric painting (ED) and filtration of chemical solutions | Filtration of Strong Strength, Milk, and Water |
Filtration of mechanical oil, cutting oil, heavy oil, and fuel oil | Pre filtration treatment of sterile water and ultra pure water |
Filtering of vegetable oil and vegetable oil | Filtration of industrial water, electroplating solution, and medicinal solution |
Oil injection well water filtration |
Wire wound filter performance table
nominal rating(μm) | 0.5 | 0.8 | 1 | 3 | 5 | 10 | 20 | 30 | 50 | 80 | 100 | |
Initial precision(μm) | 3-8 | 5-10 | 10-20 | 20-30 | 25-40 | 30-50 | 35-60 | 40-70 | 55-80 | 65-90 | 80-120 | |
Pollutant carrying capacity(g) | 26 | 28 | 30 | 31 | 32 | 33 | 34 | 36 | 54 | 64 | 70 | |
Water flow rate(L/min) | 6.0 | 12 | 15 | 20 | 25 | 30 | 32 | 36 | 40 | 45 | 50 | |
Oil flow rate | 20cst | 1.2 | 1.4 | 1.7 | 3.2 | 4.6 | 5.9 | 10 | 20 | 22 | 26 | 27 |
30cst | 1.0 | 1.2 | 1.5 | 2.0 | 2.3 | 5.0 | 11 | 14 | 18 | 22 | 25 | |
60cst | 0.67 | 0.8 | 1.0 | 1.3 | 2.0 | 2.3 | 2.0 | 8.0 | 40 | 13 | 15 | |
120cst | 0.42 | 0.5 | 0.6 | 0.8 | 1.1 | 1.5 | 4.0 | 4.5 | 5.1 | 6.5 | 7.4 | |
Filter selection instructions
Series code | Filter element degree | Filter precisionμm | Filter layer material | Frame material | internal diameter |
XRL Wire wound filter element XRLT Activated carbon wire wound filter | 250mm (10inch254mm) 500mm (20inch508mm) 750mm (30inch762mm) 1000mm (40inch1016mm) | 0.5 0.8 1 3 5 10 20 30 50 100 |
P: Polypropylene (PP) M: Degreased cotton B: Fiberglass |
J: Stainless steel frame (Not labeled as polypropylene rack) |
I: Inner I: Inner diameter of 28 H: Inner diameter of 30 |